Bits and pieces and bedliner

Took a while, but I found a Napa Auto parts that sells 90 weight mineral oil that won't rot my transmission gold.

To finish up the interior floor for bedliner, I have to get the tranny tunnel figured out.  Here's my best effort.

A little rust treatment.

This pin (which I'll have to replace at some point) holds the Dana 18 shifters in place.  It's also greasable, which is good, but that makes it more delicate for hammering in place.

This is where I'll cut the cover to make room for the Dana 18 shifter.

The last remaining bit of Herculiner finished off the driver's and passenger's foot wells.

This is a bored out window frame mount that I'm going to repurpose as a side-view mirror mount.

These are other bits I'll need.  On the right is the Dana 18 breather cap.